Detail Fluke Networks MT-8200-60A IntelliTone Pro 200 Toner
Fluke Networks MT-8200-60A
IntelliTone Pro 200 Toner
Eliminates confusion over cable location; decisively rejects noise and false signals
Locates the correct cable bundle
Isolates a cable within the bundle, despite cable bleed
Verifies twisted-pair installation with visual end-to-end continuity test ( opens, shorts and reversed pairs)
Identifies individual wire pairs with new SmartTone analog toning
Simplifies signal interpretation in noisy environments with multiple LED indicators
Finds the cables the others can’ t
SmartTone analog signal precisely isolates individual wire pairs
Tones safely and clearly on active networks
Diagnoses essential cable information with polarity, continuity, and talk battery
Identifies and diagnoses POTS with Line 1 and Line 2 service and polarity
Identifies and diagnoses 10/ 100/ 1 Gb Ethernet link connectivity with NIC/ hub indication
Verifies twisted-pair installation with CableMap capability which
identifies common cable miswire
Specification
General
Vibration Random, 2 g, 5 Hz – 500 Hz
Shock 1 m drop test with and without module
Safety EN 61010-1 1st Edition + Amendments 1, 2
Altitude 3000 m
EMC EN 61326-1
Battery type and life 9 V alkaline ( NEDA 1604A or IEC 6LR61) ; 20 hours typical
Applications Copper cabling media, including shielded ( STP) and UTP cable; 75 or 50 Ohm coaxial cable; two conductor control, security, generic cabling. 10 Base-T or 10/ 100/ 1000 Base-T datacom networks. POTS telecom service.
Toner
Display LED
Control Thumbwheel switch
Toner interface Main Mod8 port for tone generation on all 4 pairs of UTP / STP cabling, F connector for coaxial cabling,
Banana jack plugs ( 2) - two conductor wiring
Toner frequency IntelliTone signal: encoded digital signal Analog SmartTone signal: 500-1200Hz, 4 Songs
Talk battery voltage 6 V into 600 W
Output power 5 V p-p
Voltage protection 100 V
Auto power down Turns off automatically after 2.5 hours of inactivity
Probe
Display ( 8) LED indicators, Synch LED indicator
Audio IntelliTone: Microprocessor controlled audio files, Analog: Detected toner signal
Control Thumbwheel switch, volume control wheel
Tone detection Detects IntelliTone digital signal for Locate, Isolate and CableMap
Detects Analog SmartTone Signal ( 500-1200Hz) and other analog toners.
Toner interface Main Mod8 port for cablemap on all four pairs of UTP / STP cabling
Auto power down Turns off automatically after one hour of inactivity
Fluke Networks MT-8200-60A Intellitone 200 Toner and Probe Kit with F Connector Adaptor, ( 2) RJ11 and ( 2) RJ45 Patch Cables and Test Leads with Alligator Clips
INDONESIA INSTRUMENT
BUANA SURVEY JAKARTA 0217321129
JL. MUCHTAR RAYA NO. 1D, KREO - CILEDUG 15156
CP : IRFAN 081908101888
T : 0217321129 F : 0217302811 M : 081908101888
Tampilkan Lebih Banyak